TECHNICAL

 

Description of Pratic Volet

3 Pratic Volet motorisation models

• ECO: hold down the pushbutton throughout the shutter movement
  
• STANDARD: press the wired switch (fixed location), the motor stalls on reaching an obstacle, and stops after a set time. Remote-control, grouped or timer controls can be used.
  
• PRESTIGE: press the remote-control button; the motor stalls on reaching an obstacle, and stops after a set time. The unit is delivered with a single transmitter, and grouped control is possible by adding a transmitter or remote-control timer. Radio-frequency communications are provided by a Simu 433 MHz unit (compatible with Somfy’s 433 MHz radio-frequency remote controls).

Wall-mounted remote control unit - telecommande radio murale

Wired pushbutton controller - interrupteur filaire

Under-lintel installation - pose sous linteau

Sill-top installation - pose en appui de fenètre

Description

• Lacquered 85 x 45 mm aluminium housing in 2 clip-fastening parts.
• Lacquered aluminium runners.
• Lacquered tempered steel arm, tempered steel gears and hardened steel arm drive gears.
• Housing fixed by 2 wood screws at each vertical window side, plus a central fixing for units over 1000 mm wide.
• Motor 230V 50Hz with earth, protection index IP 44, power 165W.
• Supplied with 1600 mm of cabling, fixing screws and fixing template.
• Can be disengaged using a 13 mm spanner (can be reengaged without disturbing the time lag between the 2 panels).
• In all cases, Pratic Volet units can be stopped in mid-travel.
• Travel time 20 seconds.
• No end-of-travel point to set.
• three-year warranty.
• Tested for 10,000 operations.
• Requires only 90 mm between the shutter and the window.

CLOSE-UP

Points to check

Note: Dimension B can be reduced simply by moving the angle transmission units; this changes only the installation's minimum dimension.

INSTALLATION INSTRUCTIONS FOR DOWNLOAD

Made-to-measure under-lintel installation instructions 2009.pdf